2-in-1 COMBO Drill Rivet Adapter, Rivnut and Blind Rivets, For Rivnuts M3-M12, Rivets 2.4-6.4mm

• Drill speed for optimum performance < 20 rpm
• Clamping into the drill with the hexagonal 5/16" shaft
• Recommended to use with electric or battery-powered tools with min. required torque in the range from 2Nm to 22Nm (depending on the size and material of the rivet used)
• THE ADAPTER CAN NOT BE USED WITH ANY TYPE OF IMPACT ELECTRIC, BATTERY OR PNEUMATIC TOOL AND MUST NOT BE USED WITH THE HAMMER FUNCTION.
• This combination model applies both nut and blind rivets and has a compact frame, reinforced internal mechanism and practical T-handle.
• The riveting attachment of the T-COMBO tool is factory set ready to work with nut rivets. To work with blind rivets, swap out the rivnut module and replace with the supplied blind rivet module. The replacement procedure is explained in the provided instructions.

additional parameter: Applicable sizes of rivnuts: M3-M4-M5-M6-M8-M10-M12 and blind rivets: 2.4-3.2-4.0-4.8-6.0-6.4mm; from materials Al, copper, steel, stainless steel

technical parameters: For Rivnuts M3-M12, Rivets 2.4-6.4mm